98堂亚洲精品无码福利,欧洲妇熟妇色黄性色,免费欧洲毛片A级视频大陆,hs高清无码在线观看网站

        Hello, welcome to the official website of Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD
        Hot keywords:

        Rexroth hydraulic pump hydraulic pump station plunger pump hydraulic station system variable plunger pump

         

        About us
        News

        Rexroth A7VO variable pump

        Your position: Home page > Product center > Rexroth hydraulic pump > Rexroth A7VO variable pump

        Rexroth A7VO variable pump

        Rexroth A7VO variable pump

        Classification: Rexroth hydraulic pump

        Ddetailed information

        Rexroth A7VO variable pump

        safety instructions
        -The A7VO pump is designed for use in open circuits.
        -Project planning, installation and commissioning of the axial piston unit must be carried out by qualified personnel.
        -Before using the axial piston unit, please read the corresponding instruction manual completely. If necessary, it can be obtained from Bosch Rexroth.
        -During and shortly after operation, the axial piston unit (especially the solenoid) may be at risk of causing burns. Appropriate safety measures (such as wearing protective clothing) should be taken.
        -The characteristics of the axial piston unit may change due to different working conditions (working pressure, oil temperature).
        -Working line oil port:
        · The oil port and fixed thread are designed for the maximum specified pressure. The manufacturer of the machine or system must ensure that the safety factors of the connected components and pipelines meet the specified working conditions (pressure, flow, hydraulic oil, temperature).
        · Working line oil ports and functional oil ports are only used for hydraulic lines.
        -Pressure shut-off valve and pressure controller do not provide overpressure safety protection. An overflow valve will be provided in the hydraulic system.
        -The data and instructions contained herein must be followed.
        -The product cannot be approved as a component that complies with the general machinery safety concept of ISO 13849.
        -Use the following tightening torques:
        · Connector:
        Refer to the manufacturer's instructions for the tightening torque of the joints used.
        · Installation bolts:
        For mounting bolts with ISO metric threads that meet DIN 13 standards and threads that meet ASME B1.1 standards, we recommend checking the tightening torque of each box according to VDI 2230.
        · The threaded hole of the axial plunger unit:
        The maximum allowable tightening torque MG max is the maximum value for internal threaded holes, and must not exceed this value.
        · Locking screw:
        For the metal locking screw provided with the axial plunger unit, the tightening torque MV required for the locking screw should be used.


         
           
           
           
           

         

        Product navigation

        Home page  REXROTH  About Us  News Center  Download Center  Product Center  Site Map  XML Map

        Wuhan Xinlaifu Hydraulic pneumatic Equipment Co. LTD

        Tel: 027-85849187? Fax: 027-85849186? Pgone: 13971340391

        Email: wh@rexroth-hyd.com? QQ:2909698088

        Address: No. 28-30, Building 7, Hubei Modern Hardware & Electrical City, Dongxihu District, Wuhan

        Factory address: Shenghua Industrial Park, Xincheng 12th Road, Dongxihu District, Wuhan

        鄂ICP備16006620號6?

        鄂公網安備 42010302001238號

        You are the 1345746th visitor